Struct alloc::collections::vec_deque::VecDeque

pub struct VecDeque<T> { /* fields omitted */ }

A double-ended queue implemented with a growable ring buffer.

The "default" usage of this type as a queue is to use push_back to add to the queue, and pop_front to remove from the queue. extend and append push onto the back in this manner, and iterating over VecDeque goes front to back.

Methods

impl<T> VecDeque<T>

pub fn new() -> VecDeque<T>

Creates an empty VecDeque.

Examples

use std::collections::VecDeque;

let vector: VecDeque<u32> = VecDeque::new();

pub fn with_capacity(capacity: usize) -> VecDeque<T>

Creates an empty VecDeque with space for at least capacity elements.

Examples

use std::collections::VecDeque;

let vector: VecDeque<u32> = VecDeque::with_capacity(10);

pub fn get(&self, index: usize) -> Option<&T>

Retrieves an element in the VecDeque by index.

Element at index 0 is the front of the queue.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(3);
buf.push_back(4);
buf.push_back(5);
assert_eq!(buf.get(1), Some(&4));

pub fn get_mut(&mut self, index: usize) -> Option<&mut T>

Retrieves an element in the VecDeque mutably by index.

Element at index 0 is the front of the queue.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(3);
buf.push_back(4);
buf.push_back(5);
if let Some(elem) = buf.get_mut(1) {
    *elem = 7;
}

assert_eq!(buf[1], 7);

pub fn swap(&mut self, i: usize, j: usize)

Swaps elements at indices i and j.

i and j may be equal.

Element at index 0 is the front of the queue.

Panics

Panics if either index is out of bounds.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(3);
buf.push_back(4);
buf.push_back(5);
assert_eq!(buf, [3, 4, 5]);
buf.swap(0, 2);
assert_eq!(buf, [5, 4, 3]);

pub fn capacity(&self) -> usize

Returns the number of elements the VecDeque can hold without reallocating.

Examples

use std::collections::VecDeque;

let buf: VecDeque<i32> = VecDeque::with_capacity(10);
assert!(buf.capacity() >= 10);

pub fn reserve_exact(&mut self, additional: usize)

Reserves the minimum capacity for exactly additional more elements to be inserted in the given VecDeque. Does nothing if the capacity is already sufficient.

Note that the allocator may give the collection more space than it requests. Therefore capacity can not be relied upon to be precisely minimal. Prefer reserve if future insertions are expected.

Panics

Panics if the new capacity overflows usize.

Examples

use std::collections::VecDeque;

let mut buf: VecDeque<i32> = vec![1].into_iter().collect();
buf.reserve_exact(10);
assert!(buf.capacity() >= 11);

pub fn reserve(&mut self, additional: usize)

Reserves capacity for at least additional more elements to be inserted in the given VecDeque. The collection may reserve more space to avoid frequent reallocations.

Panics

Panics if the new capacity overflows usize.

Examples

use std::collections::VecDeque;

let mut buf: VecDeque<i32> = vec![1].into_iter().collect();
buf.reserve(10);
assert!(buf.capacity() >= 11);

pub fn try_reserve_exact(
    &mut self,
    additional: usize
) -> Result<(), TryReserveError>

🔬 This is a nightly-only experimental API. (try_reserve #48043)

new API

Tries to reserves the minimum capacity for exactly additional more elements to be inserted in the given VecDeque<T>. After calling reserve_exact, capacity will be greater than or equal to self.len() + additional. Does nothing if the capacity is already sufficient.

Note that the allocator may give the collection more space than it requests. Therefore, capacity can not be relied upon to be precisely minimal. Prefer reserve if future insertions are expected.

Errors

If the capacity overflows, or the allocator reports a failure, then an error is returned.

Examples

#![feature(try_reserve)]
use std::collections::TryReserveError;
use std::collections::VecDeque;

fn process_data(data: &[u32]) -> Result<VecDeque<u32>, TryReserveError> {
    let mut output = VecDeque::new();

    // Pre-reserve the memory, exiting if we can't
    output.try_reserve_exact(data.len())?;

    // Now we know this can't OOM in the middle of our complex work
    output.extend(data.iter().map(|&val| {
        val * 2 + 5 // very complicated
    }));

    Ok(output)
}

pub fn try_reserve(&mut self, additional: usize) -> Result<(), TryReserveError>

🔬 This is a nightly-only experimental API. (try_reserve #48043)

new API

Tries to reserve capacity for at least additional more elements to be inserted in the given VecDeque<T>. The collection may reserve more space to avoid frequent reallocations. After calling reserve, capacity will be greater than or equal to self.len() + additional. Does nothing if capacity is already sufficient.

Errors

If the capacity overflows, or the allocator reports a failure, then an error is returned.

Examples

#![feature(try_reserve)]
use std::collections::TryReserveError;
use std::collections::VecDeque;

fn process_data(data: &[u32]) -> Result<VecDeque<u32>, TryReserveError> {
    let mut output = VecDeque::new();

    // Pre-reserve the memory, exiting if we can't
    output.try_reserve(data.len())?;

    // Now we know this can't OOM in the middle of our complex work
    output.extend(data.iter().map(|&val| {
        val * 2 + 5 // very complicated
    }));

    Ok(output)
}

pub fn shrink_to_fit(&mut self)

Shrinks the capacity of the VecDeque as much as possible.

It will drop down as close as possible to the length but the allocator may still inform the VecDeque that there is space for a few more elements.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::with_capacity(15);
buf.extend(0..4);
assert_eq!(buf.capacity(), 15);
buf.shrink_to_fit();
assert!(buf.capacity() >= 4);

pub fn shrink_to(&mut self, min_capacity: usize)

🔬 This is a nightly-only experimental API. (shrink_to #56431)

new API

Shrinks the capacity of the VecDeque with a lower bound.

The capacity will remain at least as large as both the length and the supplied value.

Panics if the current capacity is smaller than the supplied minimum capacity.

Examples

#![feature(shrink_to)]
use std::collections::VecDeque;

let mut buf = VecDeque::with_capacity(15);
buf.extend(0..4);
assert_eq!(buf.capacity(), 15);
buf.shrink_to(6);
assert!(buf.capacity() >= 6);
buf.shrink_to(0);
assert!(buf.capacity() >= 4);

pub fn truncate(&mut self, len: usize)

Shortens the VecDeque, dropping excess elements from the back.

If len is greater than the VecDeque's current length, this has no effect.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(5);
buf.push_back(10);
buf.push_back(15);
assert_eq!(buf, [5, 10, 15]);
buf.truncate(1);
assert_eq!(buf, [5]);

Important traits for Iter<'a, T>

impl<'a, T> Iterator for Iter<'a, T> type Item = &'a T;

pub fn iter(&self) -> Iter<T>

Returns a front-to-back iterator.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(5);
buf.push_back(3);
buf.push_back(4);
let b: &[_] = &[&5, &3, &4];
let c: Vec<&i32> = buf.iter().collect();
assert_eq!(&c[..], b);

Important traits for IterMut<'a, T>

impl<'a, T> Iterator for IterMut<'a, T> type Item = &'a mut T;

pub fn iter_mut(&mut self) -> IterMut<T>

Returns a front-to-back iterator that returns mutable references.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(5);
buf.push_back(3);
buf.push_back(4);
for num in buf.iter_mut() {
    *num = *num - 2;
}
let b: &[_] = &[&mut 3, &mut 1, &mut 2];
assert_eq!(&buf.iter_mut().collect::<Vec<&mut i32>>()[..], b);

pub fn as_slices(&self) -> (&[T], &[T])

Returns a pair of slices which contain, in order, the contents of the VecDeque.

Examples

use std::collections::VecDeque;

let mut vector = VecDeque::new();

vector.push_back(0);
vector.push_back(1);
vector.push_back(2);

assert_eq!(vector.as_slices(), (&[0, 1, 2][..], &[][..]));

vector.push_front(10);
vector.push_front(9);

assert_eq!(vector.as_slices(), (&[9, 10][..], &[0, 1, 2][..]));

pub fn as_mut_slices(&mut self) -> (&mut [T], &mut [T])

Returns a pair of slices which contain, in order, the contents of the VecDeque.

Examples

use std::collections::VecDeque;

let mut vector = VecDeque::new();

vector.push_back(0);
vector.push_back(1);

vector.push_front(10);
vector.push_front(9);

vector.as_mut_slices().0[0] = 42;
vector.as_mut_slices().1[0] = 24;
assert_eq!(vector.as_slices(), (&[42, 10][..], &[24, 1][..]));

pub fn len(&self) -> usize

Returns the number of elements in the VecDeque.

Examples

use std::collections::VecDeque;

let mut v = VecDeque::new();
assert_eq!(v.len(), 0);
v.push_back(1);
assert_eq!(v.len(), 1);

pub fn is_empty(&self) -> bool

Returns true if the VecDeque is empty.

Examples

use std::collections::VecDeque;

let mut v = VecDeque::new();
assert!(v.is_empty());
v.push_front(1);
assert!(!v.is_empty());

Important traits for Drain<'_, T>

impl<'_, T> Iterator for Drain<'_, T> type Item = T;

pub fn drain<R>(&mut self, range: R) -> Drain<T> where
    R: RangeBounds<usize>, 

Creates a draining iterator that removes the specified range in the VecDeque and yields the removed items.

Note 1: The element range is removed even if the iterator is not consumed until the end.

Note 2: It is unspecified how many elements are removed from the deque, if the Drain value is not dropped, but the borrow it holds expires (e.g., due to mem::forget).

Panics

Panics if the starting point is greater than the end point or if the end point is greater than the length of the vector.

Examples

use std::collections::VecDeque;

let mut v: VecDeque<_> = vec![1, 2, 3].into_iter().collect();
let drained = v.drain(2..).collect::<VecDeque<_>>();
assert_eq!(drained, [3]);
assert_eq!(v, [1, 2]);

// A full range clears all contents
v.drain(..);
assert!(v.is_empty());

pub fn clear(&mut self)

Clears the VecDeque, removing all values.

Examples

use std::collections::VecDeque;

let mut v = VecDeque::new();
v.push_back(1);
v.clear();
assert!(v.is_empty());

pub fn contains(&self, x: &T) -> bool where
    T: PartialEq<T>, 

Returns true if the VecDeque contains an element equal to the given value.

Examples

use std::collections::VecDeque;

let mut vector: VecDeque<u32> = VecDeque::new();

vector.push_back(0);
vector.push_back(1);

assert_eq!(vector.contains(&1), true);
assert_eq!(vector.contains(&10), false);

pub fn front(&self) -> Option<&T>

Provides a reference to the front element, or None if the VecDeque is empty.

Examples

use std::collections::VecDeque;

let mut d = VecDeque::new();
assert_eq!(d.front(), None);

d.push_back(1);
d.push_back(2);
assert_eq!(d.front(), Some(&1));

pub fn front_mut(&mut self) -> Option<&mut T>

Provides a mutable reference to the front element, or None if the VecDeque is empty.

Examples

use std::collections::VecDeque;

let mut d = VecDeque::new();
assert_eq!(d.front_mut(), None);

d.push_back(1);
d.push_back(2);
match d.front_mut() {
    Some(x) => *x = 9,
    None => (),
}
assert_eq!(d.front(), Some(&9));

pub fn back(&self) -> Option<&T>

Provides a reference to the back element, or None if the VecDeque is empty.

Examples

use std::collections::VecDeque;

let mut d = VecDeque::new();
assert_eq!(d.back(), None);

d.push_back(1);
d.push_back(2);
assert_eq!(d.back(), Some(&2));

pub fn back_mut(&mut self) -> Option<&mut T>

Provides a mutable reference to the back element, or None if the VecDeque is empty.

Examples

use std::collections::VecDeque;

let mut d = VecDeque::new();
assert_eq!(d.back(), None);

d.push_back(1);
d.push_back(2);
match d.back_mut() {
    Some(x) => *x = 9,
    None => (),
}
assert_eq!(d.back(), Some(&9));

pub fn pop_front(&mut self) -> Option<T>

Removes the first element and returns it, or None if the VecDeque is empty.

Examples

use std::collections::VecDeque;

let mut d = VecDeque::new();
d.push_back(1);
d.push_back(2);

assert_eq!(d.pop_front(), Some(1));
assert_eq!(d.pop_front(), Some(2));
assert_eq!(d.pop_front(), None);

pub fn pop_back(&mut self) -> Option<T>

Removes the last element from the VecDeque and returns it, or None if it is empty.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
assert_eq!(buf.pop_back(), None);
buf.push_back(1);
buf.push_back(3);
assert_eq!(buf.pop_back(), Some(3));

pub fn push_front(&mut self, value: T)

Prepends an element to the VecDeque.

Examples

use std::collections::VecDeque;

let mut d = VecDeque::new();
d.push_front(1);
d.push_front(2);
assert_eq!(d.front(), Some(&2));

pub fn push_back(&mut self, value: T)

Appends an element to the back of the VecDeque.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(1);
buf.push_back(3);
assert_eq!(3, *buf.back().unwrap());

pub fn swap_remove_front(&mut self, index: usize) -> Option<T>

Removes an element from anywhere in the VecDeque and returns it, replacing it with the first element.

This does not preserve ordering, but is O(1).

Returns None if index is out of bounds.

Element at index 0 is the front of the queue.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
assert_eq!(buf.swap_remove_front(0), None);
buf.push_back(1);
buf.push_back(2);
buf.push_back(3);
assert_eq!(buf, [1, 2, 3]);

assert_eq!(buf.swap_remove_front(2), Some(3));
assert_eq!(buf, [2, 1]);

pub fn swap_remove_back(&mut self, index: usize) -> Option<T>

Removes an element from anywhere in the VecDeque and returns it, replacing it with the last element.

This does not preserve ordering, but is O(1).

Returns None if index is out of bounds.

Element at index 0 is the front of the queue.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
assert_eq!(buf.swap_remove_back(0), None);
buf.push_back(1);
buf.push_back(2);
buf.push_back(3);
assert_eq!(buf, [1, 2, 3]);

assert_eq!(buf.swap_remove_back(0), Some(1));
assert_eq!(buf, [3, 2]);

pub fn insert(&mut self, index: usize, value: T)

Inserts an element at index within the VecDeque, shifting all elements with indices greater than or equal to index towards the back.

Element at index 0 is the front of the queue.

Panics

Panics if index is greater than VecDeque's length

Examples

use std::collections::VecDeque;

let mut vec_deque = VecDeque::new();
vec_deque.push_back('a');
vec_deque.push_back('b');
vec_deque.push_back('c');
assert_eq!(vec_deque, &['a', 'b', 'c']);

vec_deque.insert(1, 'd');
assert_eq!(vec_deque, &['a', 'd', 'b', 'c']);

pub fn remove(&mut self, index: usize) -> Option<T>

Removes and returns the element at index from the VecDeque. Whichever end is closer to the removal point will be moved to make room, and all the affected elements will be moved to new positions. Returns None if index is out of bounds.

Element at index 0 is the front of the queue.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(1);
buf.push_back(2);
buf.push_back(3);
assert_eq!(buf, [1, 2, 3]);

assert_eq!(buf.remove(1), Some(2));
assert_eq!(buf, [1, 3]);

pub fn split_off(&mut self, at: usize) -> Self

Splits the VecDeque into two at the given index.

Returns a newly allocated VecDeque. self contains elements [0, at), and the returned VecDeque contains elements [at, len).

Note that the capacity of self does not change.

Element at index 0 is the front of the queue.

Panics

Panics if at > len.

Examples

use std::collections::VecDeque;

let mut buf: VecDeque<_> = vec![1,2,3].into_iter().collect();
let buf2 = buf.split_off(1);
assert_eq!(buf, [1]);
assert_eq!(buf2, [2, 3]);

pub fn append(&mut self, other: &mut Self)

Moves all the elements of other into self, leaving other empty.

Panics

Panics if the new number of elements in self overflows a usize.

Examples

use std::collections::VecDeque;

let mut buf: VecDeque<_> = vec![1, 2].into_iter().collect();
let mut buf2: VecDeque<_> = vec![3, 4].into_iter().collect();
buf.append(&mut buf2);
assert_eq!(buf, [1, 2, 3, 4]);
assert_eq!(buf2, []);

pub fn retain<F>(&mut self, f: F) where
    F: FnMut(&T) -> bool, 

Retains only the elements specified by the predicate.

In other words, remove all elements e such that f(&e) returns false. This method operates in place, visiting each element exactly once in the original order, and preserves the order of the retained elements.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.extend(1..5);
buf.retain(|&x| x % 2 == 0);
assert_eq!(buf, [2, 4]);

The exact order may be useful for tracking external state, like an index.

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.extend(1..6);

let keep = [false, true, true, false, true];
let mut i = 0;
buf.retain(|_| (keep[i], i += 1).0);
assert_eq!(buf, [2, 3, 5]);

pub fn resize_with(&mut self, new_len: usize, generator: impl FnMut() -> T)

Modifies the VecDeque in-place so that len() is equal to new_len, either by removing excess elements from the back or by appending elements generated by calling generator to the back.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(5);
buf.push_back(10);
buf.push_back(15);
assert_eq!(buf, [5, 10, 15]);

buf.resize_with(5, Default::default);
assert_eq!(buf, [5, 10, 15, 0, 0]);

buf.resize_with(2, || unreachable!());
assert_eq!(buf, [5, 10]);

let mut state = 100;
buf.resize_with(5, || { state += 1; state });
assert_eq!(buf, [5, 10, 101, 102, 103]);

pub fn rotate_left(&mut self, mid: usize)

Rotates the double-ended queue mid places to the left.

Equivalently,

• Rotates item mid into the first position.
• Pops the first mid items and pushes them to the end.
• Rotates len() - mid places to the right.

Panics

If mid is greater than len(). Note that mid == len() does not panic and is a no-op rotation.

Complexity

Takes O(min(mid, len() - mid)) time and no extra space.

Examples

use std::collections::VecDeque;

let mut buf: VecDeque<_> = (0..10).collect();

buf.rotate_left(3);
assert_eq!(buf, [3, 4, 5, 6, 7, 8, 9, 0, 1, 2]);

for i in 1..10 {
    assert_eq!(i * 3 % 10, buf[0]);
    buf.rotate_left(3);
}
assert_eq!(buf, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]);

pub fn rotate_right(&mut self, k: usize)

Rotates the double-ended queue k places to the right.

Equivalently,

• Rotates the first item into position k.
• Pops the last k items and pushes them to the front.
• Rotates len() - k places to the left.

Panics

If k is greater than len(). Note that k == len() does not panic and is a no-op rotation.

Complexity

Takes O(min(k, len() - k)) time and no extra space.

Examples

use std::collections::VecDeque;

let mut buf: VecDeque<_> = (0..10).collect();

buf.rotate_right(3);
assert_eq!(buf, [7, 8, 9, 0, 1, 2, 3, 4, 5, 6]);

for i in 1..10 {
    assert_eq!(0, buf[i * 3 % 10]);
    buf.rotate_right(3);
}
assert_eq!(buf, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]);

impl<T: Clone> VecDeque<T>

pub fn resize(&mut self, new_len: usize, value: T)

Modifies the VecDeque in-place so that len() is equal to new_len, either by removing excess elements from the back or by appending clones of value to the back.

Examples

use std::collections::VecDeque;

let mut buf = VecDeque::new();
buf.push_back(5);
buf.push_back(10);
buf.push_back(15);
assert_eq!(buf, [5, 10, 15]);

buf.resize(2, 0);
assert_eq!(buf, [5, 10]);

buf.resize(5, 20);
assert_eq!(buf, [5, 10, 20, 20, 20]);

Trait Implementations

impl<T> From<Vec<T>> for VecDeque<T>

fn from(other: Vec<T>) -> Self

Turn a Vec<T> into a VecDeque<T>.

This avoids reallocating where possible, but the conditions for that are strict, and subject to change, and so shouldn't be relied upon unless the Vec<T> came from From<VecDeque<T>> and hasn't been reallocated.

impl<T> From<VecDeque<T>> for Vec<T>

fn from(other: VecDeque<T>) -> Self

Turn a VecDeque<T> into a Vec<T>.

This never needs to re-allocate, but does need to do O(n) data movement if the circular buffer doesn't happen to be at the beginning of the allocation.

Examples

use std::collections::VecDeque;

// This one is O(1).
let deque: VecDeque<_> = (1..5).collect();
let ptr = deque.as_slices().0.as_ptr();
let vec = Vec::from(deque);
assert_eq!(vec, [1, 2, 3, 4]);
assert_eq!(vec.as_ptr(), ptr);

// This one needs data rearranging.
let mut deque: VecDeque<_> = (1..5).collect();
deque.push_front(9);
deque.push_front(8);
let ptr = deque.as_slices().1.as_ptr();
let vec = Vec::from(deque);
assert_eq!(vec, [8, 9, 1, 2, 3, 4]);
assert_eq!(vec.as_ptr(), ptr);

impl<A: PartialEq> PartialEq<VecDeque<A>> for VecDeque<A>

fn eq(&self, other: &VecDeque<A>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<A, B> PartialEq<Vec<B>> for VecDeque<A> where
    A: PartialEq<B>, 

fn eq(&self, other: &Vec<B>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ [B]> for VecDeque<A> where
    A: PartialEq<B>, 

fn eq(&self, other: &&[B]) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, A, B> PartialEq<&'_ mut [B]> for VecDeque<A> where
    A: PartialEq<B>, 

fn eq(&self, other: &&mut [B]) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<A, B, const N: usize> PartialEq<[B; N]> for VecDeque<A> where
    A: PartialEq<B>,
    [B; N]: LengthAtMost32, 

fn eq(&self, other: &[B; N]) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, A, B, const N: usize> PartialEq<&'_ [B; N]> for VecDeque<A> where
    A: PartialEq<B>,
    [B; N]: LengthAtMost32, 

fn eq(&self, other: &&[B; N]) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, A, B, const N: usize> PartialEq<&'_ mut [B; N]> for VecDeque<A> where
    A: PartialEq<B>,
    [B; N]: LengthAtMost32, 

fn eq(&self, other: &&mut [B; N]) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<A: Eq> Eq for VecDeque<A>

impl<A: Ord> Ord for VecDeque<A>

fn cmp(&self, other: &VecDeque<A>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval.

impl<A: PartialOrd> PartialOrd<VecDeque<A>> for VecDeque<A>

fn partial_cmp(&self, other: &VecDeque<A>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<A: Hash> Hash for VecDeque<A>

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl<T> Drop for VecDeque<T>

fn drop(&mut self)

Executes the destructor for this type.

impl<A> Index<usize> for VecDeque<A>

type Output = A

The returned type after indexing.

fn index(&self, index: usize) -> &A

Performs the indexing (container[index]) operation.

impl<A> IndexMut<usize> for VecDeque<A>

fn index_mut(&mut self, index: usize) -> &mut A

Performs the mutable indexing (container[index]) operation.

impl<T: Debug> Debug for VecDeque<T>

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<A> FromIterator<A> for VecDeque<A>

fn from_iter<T: IntoIterator<Item = A>>(iter: T) -> VecDeque<A>

Creates a value from an iterator.

impl<T> IntoIterator for VecDeque<T>

type Item = T

The type of the elements being iterated over.

type IntoIter = IntoIter<T>

Which kind of iterator are we turning this into?

Important traits for IntoIter<T>

impl<T> Iterator for IntoIter<T> type Item = T;

fn into_iter(self) -> IntoIter<T>

Consumes the VecDeque into a front-to-back iterator yielding elements by value.

impl<'a, T> IntoIterator for &'a VecDeque<T>

type Item = &'a T

The type of the elements being iterated over.

type IntoIter = Iter<'a, T>

Which kind of iterator are we turning this into?

Important traits for Iter<'a, T>

impl<'a, T> Iterator for Iter<'a, T> type Item = &'a T;

fn into_iter(self) -> Iter<'a, T>

Creates an iterator from a value.

impl<'a, T> IntoIterator for &'a mut VecDeque<T>

type Item = &'a mut T

The type of the elements being iterated over.

type IntoIter = IterMut<'a, T>

Which kind of iterator are we turning this into?

Important traits for IterMut<'a, T>

impl<'a, T> Iterator for IterMut<'a, T> type Item = &'a mut T;

fn into_iter(self) -> IterMut<'a, T>

Creates an iterator from a value.

impl<A> Extend<A> for VecDeque<A>

fn extend<T: IntoIterator<Item = A>>(&mut self, iter: T)

Extends a collection with the contents of an iterator.

impl<'a, T: 'a + Copy> Extend<&'a T> for VecDeque<T>

fn extend<I: IntoIterator<Item = &'a T>>(&mut self, iter: I)

Extends a collection with the contents of an iterator.

impl<T: Clone> Clone for VecDeque<T>

fn clone(&self) -> VecDeque<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Default for VecDeque<T>

fn default() -> VecDeque<T>

Creates an empty VecDeque<T>.